自动化运维工具-服务自动化部署平台之Saltstack总结

Posted by Yancy on 2015-12-10

服务自动化部署平台之Saltstack总结

Saltstack是一个新的基础设施管理工具。目前处于快速发展阶段,可以看做是强化的Func+弱化的Puppet的组合。间接的反映出了saltstack的两大功能:远程执行和配置管理。

SaltStack 保持了输入、输出、配置文件的一致性,所有文件均使用YAML格式。主要负责配置管理和远程执行(在远程主机运行预定义或任意的命令,也叫远程执行,这是 Salt的核心功能。接下来的链接展示了模块(module)和返回器(returner),这是远程执行的关键所在。)

Salt是基于python写的经典C/S框架的自动化部署平台。由Master和Minion构成,通过ZeroMQ进行通信。

Master与Minion认证

1.minion 在第一次启动时,会在/etc/salt/pki/minion/(该路径在/etc/salt/minion里面设置)下自动生成 minion.pem(private key)和minion.pub(public key),然后将minion.pub发送给master。

2.master 在接收到minion的public key后,通过salt-key命令accept minion public key,这样在master的/etc/salt/pki/master/minions下的将会存放以minion id命名的public key, 然后master就能对minion发送指令了。

Master与Minion的连接

Saltstack master启动后默认监听4505和4506两个端口。4505(publish_port)为salt的消息发布系统,4506(ret_port) 为salt客户端与服务端通信的端口。如果使用lsof查看4505端口,会发现所有的Minion在4505端口持续保持在ESTABLISHED

参考文档:

http://blog.javachen.com/2013/11/18/study-note-of-saltstack/ 经典搭建框架
http://www.linuxyw.com/179.html salt搭建参考

http://blog.halfss.com/blog/2013/05/22/yun-wei-zi-dong-hua-zhi-saltxue-xi-bi-ji/

salt的安装:

master端:

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
#yum install salt-master -y salt主控端安装
#vim /etc/salt/master salt主配置文件修改
interface: 服务监听IP
auto_accept: True(可选,key通过‘salt-key -a keyname’命令手动进行认证)
注意:keyname 就是客户端中设置的id标识(可以查看salt-minion端的配置)
#salt-master -l debug debug模式,查看salt都进行哪些操作
#/etc/init.d/salt-master restart 重启salt服务
#/etc/init.d/salt-master status 查看状态
#netstat -antlp | grep 4505 确保消息发布端口正常
#netstat -antlp | grep 4506 确保客户端与服务端通信端口正常
#/etc/init.d/salt-master restart
# /etc/init.d/salt-master status
# salt-key 查看认证相关信息
# salt-key -a wy-pe2 手动添加认证key(给wy-pe2主机添加认证)
#iptables -F 关闭防火墙以免影响认证
#salt-key -a wy-pe2
#salt-key -L 查看认证信息(会有显示已经认证和未认证的相关信息)
[root@wy-pe1 ~]# salt-key -L
Accepted Keys:
wy-pe2 已经允许的key(表示wy-pe2已经允许认证了)
Unaccepted Keys:
Rejected Keys:
#cd /etc/salt/pki/master/minions 在master中的minions目录中生成认证的key
#setenforce 0 暂时关闭selinux
#/etc/init.d/salt-master restart
执行远程命令(使用salt内建的模块):
#salt ‘wy-pe2′ test.ping 测试master和minion进行通信(在master端进行ping响应测试)
[root@wy-pe1 ~]# salt ‘wy-pe2′ test.ping 如果能ping通,则为True
wy-pe2:
True
#lsof -i:4505 查看到minion端都和4505保持建立
[root@wy-pe1 ~]# lsof -i:4505
COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
salt-mast 8568 root 12u IPv4 63217 0t0 TCP *:4505 (LISTEN)
salt-mast 8568 root 14u IPv4 65101 0t0 TCP wy-pe1:4505->wy-pe2:51237 (ESTABLISHED)(表示建立连接了)
注意:如果认证那块没做好,就会影响相关的链接

Salt客户端安装:

minion端安装配置:

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
#yum install salt-minion -y
#vim /etc/salt/minion 修改minion客户端主配置
master: 服务端主机名
id: 客户端主机名(其实也就是认证key的名字) 用来和master进行认证
#/etc/init.d/salt-minion restart 重启服务
#cd /etc/salt/pki/minion/ 在这个目录底下会生成两个认证文件(minion.pub minion.pem)
salt-minion端不能正常启动的解决步骤:(一般就是iptables和selinux的影响)
#/etc/init.d/salt-minion restart
# tail -f /var/log/messages
#/etc/init.d/salt-minion restart
#iptables -F
#tail -f /var/log/salt/minion
#salt-minion -l debug
#setenforce 0
#/etc/init.d/salt-minion restart
安装完毕,在master和minion认证完毕之后会在minion主机上的/etc/salt/pki/minion/目录底下生成新的minion_master.pub
问题1:档master和minion进行认证的时候,master没有接收到public key(minion)
(这个在后来的链接过程中会造成master和minion不能链接)
问题2:辅机salt-minion总是在查看服务状态的时候显示失败(but pid exits!)
# salt-minion -l debug 查看salt客户端详细信息

salt的简单使用:

1
2
3
4
5
salt可以直接让minion执行模块命令,也可以直接执行shell命令
1.salt -C ‘wy-pe1 and wy-pe2 or wy-peN’ test.ping -C表示多参数(表示在测试多台主机的存活状态)
# salt ‘*’ disk.usage 查看磁盘使用情况(使用内建模块查看所有minion端的磁盘使用情况)
#salt ‘*’ cmd.run ‘df -h’ 使用cmd.run直接调用远程shell命令(功能同上)
# salt ‘*’ cmd.run “cat /root/lall” 查看客户端主机的/root/lall文件

2.nodegroup对minion进行分组:

1
2
3
4
5
6
7
8
9
nodegroups:
group1: ‘L@foo.domain.com,bar.domain.com,baz.domain.com or bl*.domain.com’
group2: ‘G@os :Debian and foo.domain.com’
group3:’wy-pe2′
进行分组测试:
# salt -N group3 test.ping
wy-pe2:
True

3.grains对minion基本信息的管理:

1
2
salt ‘wy-pe2′ grins.ls 查看grains分类
salt ‘wy-pe2′ grins.items 查看minnon基本信息(硬件参数)

###4.pillar对敏感信息的管理,只有匹配到的节点才能获取和使用

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
默认pillar数据定义文件存储路径:/srv/pillar
状态管理:
1.salt基于minion进行状态的管理(state)
类似于pupet的pp文件功能,salt的state文件扩展文件名为.sls,采用的是和puppet一样的设计思路。即以master
端的文件状态来确定minion端的一些状态信息设置。(安装的软件包,服务的运行状态以及需要同步的文件配置)
注意:salt默认的根目录在/srv/salt中,如果没有需要进行建立。
top.sls:这个文件类似于puppet的site.pp文件,作为“最高同步”操作的入口文件,执行“最高同步”操作时,将从此sls文件中获取状态对minion进行同步
示例:(注意,salt文件完全采用ymal格式,对代码的缩进有着严格的要求)
#vim /srv/salt/servers_package.sls
httpd: 项目名
pkg: 类型
– installed 动作(表示安装httpd包)
service:
– running
enable:True
vim-enhanced:
pkg:
– installed
tomcat环境
openjdk-7-jdk:
pkg:
– installed
tomcat7:
pkg:
– installed
– require:
– pkg: openjdk-7-jdk
# salt ‘wy-pe2′ state.sls servers_package 按照sls文件中的配置对wy-pe2进行服务配置

管理配置文件

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
httpd:
pkg:
– installed
file.managed: 文件管理(文件同步操作)
– name: /etc/httpd/conf/httpd.conf
source: salt://httpd/httpd.conf
# salt ‘wy-pe2′ state.highstate 应用修改(给minion永久添加状态)
3.使用salt schedule对minion进行实时更新,让minion自觉的保持某个状态
4.实时管理
有时候我们需要临时的查看某个机器上的某个文件,或者执行某个命令
cmd.run方式:(salt ‘$targeting’ cmd.run ‘$cmd’)用来远程执行shell命令
# salt ‘wy-pe2′ cmd.run ‘ifconfig eth0′ 查看某台主机的网络接口
cmd.script方式:可以向远程主机执行脚本
#salt ‘*’ cmd.script salt://useradd.sh 向minion主机上执行useradd.sh脚本(salt://是salt的默认发布目录,即/srv/salt)
pkg.install方式:制定主机安装软件
#salt ‘wy-pe2′ pkg.install vsftpd 指定主机安装软件
# salt ‘*’ network.interfaces 查看远程主机接口
# salt-cp ‘wy-pe2′ salt-cmd /home/xxb2 复制文件到指定的系统上(当前目录的salt-cmd)
salt是主命令,一般用来执行命令模块。
salt-cp用来复制文件到制定的系统上去
salt-key用来和minion之间进行身份验证
salt-master为服务端的主守护进程用于控制minion
salt-run为前端命令执行
module方式:(模块查看方式#salt ‘*’ sys.doc)
#salt ‘*’ disk.usage 查看磁盘使用情况
# salt ‘*’ grains.item os/osrelease/oscodename
# salt ‘*’ user(group).info xxb2
# salt ‘*’ ip.get_interface eth0
#salt ‘*’ lvm.vgdisplay

salt相关管理命令:

1
2
3
4
5
salt-run manage.up 查看存活的minion
salt-run manage.down 查看死掉的minion
salt-run manage.down removekeys=True 查看down掉的minion,并将其删除
salt-run manage.status 查看minion的相关状态
salt-run manage.versions 查看slat的所有master和minion的版本信息

附录:

salt详细使用命令

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
salt ‘*’ acl.delfacl user myuser /tmp/house/kitchen
salt ‘*’ acl.delfacl default:group mygroup /tmp/house/kitchen
salt ‘*’ acl.delfacl d:u myuser /tmp/house/kitchen
salt ‘*’ acl.delfacl g myuser /tmp/house/kitchen /tmp/house/livingroom
salt ‘*’ acl.getfacl /tmp/house/kitchen
salt ‘*’ acl.getfacl /tmp/house/kitchen /tmp/house/livingroom
salt ‘*’ acl.addfacl user myuser rwx /tmp/house/kitchen
salt ‘*’ acl.addfacl default:group mygroup rx /tmp/house/kitchen
salt ‘*’ acl.addfacl d:u myuser 7 /tmp/house/kitchen
salt ‘*’ acl.addfacl g mygroup 0 /tmp/house/kitchen /tmp/house/livingroom
salt ‘*’ acl.version
salt ‘*’ acl.wipefacls /tmp/house/kitchen
salt ‘*’ acl.wipefacls /tmp/house/kitchen /tmp/house/livingroom
salt ‘*’ aliases.get_target alias
salt ‘*’ aliases.has_target alias target
salt ‘*’ aliases.list_aliases
salt ‘*’ aliases.rm_alias alias
salt ‘*’ aliases.set_target alias target
salt ‘*’ alternatives.auto name
salt ‘*’ alternatives.check_installed name path
salt ‘*’ alternatives.display editor
salt ‘*’ alternatives.install editor /usr/bin/editor /usr/bin/emacs23 50
salt ‘*’ alternatives.remove name path
salt ‘*’ alternatives.set name path
salt ‘*’ alternatives.show_current editor
salt ‘*’ apache.config /etc/httpd/conf.d/ports.conf config=”[{‘Listen': ’22’}]”
salt ‘*’ apache.directives
salt ‘*’ apache.fullversion
salt ‘*’ apache.modules
salt ‘*’ apache.server_status
salt ‘*’ apache.server_status other-profile
salt ‘*’ apache.servermods
salt ‘*’ apache.signal restart
salt ‘*’ apache.useradd /etc/httpd/htpasswd larry badpassword
salt ‘*’ apache.useradd /etc/httpd/htpasswd larry badpass opts=ns
salt ‘*’ apache.userdel /etc/httpd/htpasswd larry
salt ‘*’ apache.version
salt ‘*’ archive.gunzip template=jinja /tmp/{{grains.id}}.txt.gz
salt ‘*’ archive.gunzip /tmp/sourcefile.txt.gz
salt ‘*’ archive.gzip template=jinja /tmp/{{grains.id}}.txt
salt ‘*’ archive.gzip /tmp/sourcefile.txt
salt ‘*’ archive.rar template=jinja /tmp/rarfile.rar ‘/tmp/sourcefile1,/tmp/{{grains.id}}.txt’
salt ‘*’ archive.rar /tmp/rarfile.rar /tmp/sourcefile1,/tmp/sourcefile2
salt ‘*’ archive.tar cjvf /tmp/salt.tar.bz2 {{grains.saltpath}} template=jinja
salt ‘*’ archive.tar cjvf /tmp/tarfile.tar.bz2 /tmp/file_1,/tmp/file_2
salt ‘*’ archive.tar xf foo.tar dest=/target/directory
salt ‘*’ archive.unrar template=jinja /tmp/rarfile.rar /tmp/{{grains.id}}/ excludes=file_1,file_2
salt ‘*’ archive.unrar /tmp/rarfile.rar /home/strongbad/ excludes=file_1,file_2
salt ‘*’ archive.unzip template=jinja /tmp/zipfile.zip /tmp/{{grains.id}}/ excludes=file_1,file_2
salt ‘*’ archive.unzip /tmp/zipfile.zip /home/strongbad/ excludes=file_1,file_2
salt ‘*’ archive.zip template=jinja /tmp/zipfile.zip /tmp/sourcefile1,/tmp/{{grains.id}}.txt
salt ‘*’ archive.zip /tmp/zipfile.zip /tmp/sourcefile1,/tmp/sourcefile2
salt ‘*’ extfs.dump /dev/sda1
salt ‘*’ blockdev.tune /dev/sda1 read-ahead=1024 read-write=True
salt ‘*’ blockdev.wipe /dev/sda1
salt ‘*’ bridge.add br0
salt ‘*’ bridge.addif br0 eth0
salt ‘*’ bridge.delete br0
salt ‘*’ bridge.delif br0 eth0
salt ‘*’ bridge.find_interfaces eth0 [eth1…]
salt ‘*’ bridge.interfaces br0
salt ‘*’ bridge.list
salt ‘*’ bridge.show
salt ‘*’ bridge.show br0
salt ‘*’ bridge.stp br0 enable
salt ‘*’ bridge.stp br0 disable
salt ‘*’ bridge.stp bridge0 enable fxp0
salt ‘*’ bridge.stp bridge0 disable fxp0
salt ‘*’ buildout.bootstrap /srv/mybuildout
salt ‘*’ buildout.buildout /srv/mybuildout
salt ‘*’ buildout.run_buildout /srv/mybuildout
salt ‘*’ buildout.upgrade_bootstrap /srv/mybuildout
salt ‘*’ cloud.action start instance=myinstance
salt ‘*’ cloud.action stop instance=myinstance
salt ‘*’ cloud.action show_image provider=my-ec2-config image=ami-1624987f
salt ‘*’ cloud.destroy myinstance
salt ‘*’ cloud.full_query
salt ‘*’ cloud.list_images my-gce-config
salt ‘*’ cloud.list_locations my-gce-config
salt ‘*’ cloud.list_sizes my-gce-config
salt ‘*’ cloud.profile my-gce-config myinstance
salt ‘*’ cloud.query
salt ‘*’ cloud.query list_nodes_full
salt ‘*’ cloud.query list_nodes_select
salt ‘*’ cloud.select_query
salt ‘*’ cmd.exec_code ruby ‘puts “cheese”‘
salt ‘*’ cmd.has_exec cat
salt ‘*’ cmd.retcode “file /bin/bash”
salt ‘*’ cmd.retcode template=jinja “file {{grains.pythonpath[0]}}/python”
salt ‘*’ cmd.retcode “grep f” stdin=’one\ntwo\nthree\nfour\nfive\n’
salt ‘*’ cmd.run “ls -l | awk ‘/foo/{print \$2}'”
salt ‘*’ cmd.run template=jinja “ls -l /tmp/{{grains.id}} | awk ‘/foo/{print \$2}'”
salt ‘*’ cmd.run “Get-ChildItem C:\ ” shell=’powershell’
salt ‘*’ cmd.run “grep f” stdin=’one\ntwo\nthree\nfour\nfive\n’
salt ‘*’ cmd.run cmd=’sed -e s/=/:/g’
salt ‘*’ cmd.run_all “ls -l | awk ‘/foo/{print \$2}'”
salt ‘*’ cmd.run_all template=jinja “ls -l /tmp/{{grains.id}} | awk ‘/foo/{print \$2}'”
salt ‘*’ cmd.run_all “grep f” stdin=’one\ntwo\nthree\nfour\nfive\n’
salt ‘*’ cmd.run_chroot /var/lib/lxc/container_name/rootfs ‘sh /tmp/bootstrap.sh’
salt ‘*’ cmd.run_stderr “ls -l | awk ‘/foo/{print \$2}'”
salt ‘*’ cmd.run_stderr template=jinja “ls -l /tmp/{{grains.id}} | awk ‘/foo/{print \$2}'”
salt ‘*’ cmd.run_stderr “grep f” stdin=’one\ntwo\nthree\nfour\nfive\n’
salt ‘*’ cmd.run_stdout “ls -l | awk ‘/foo/{print \$2}'”
salt ‘*’ cmd.run_stdout template=jinja “ls -l /tmp/{{grains.id}} | awk ‘/foo/{print \$2}'”
salt ‘*’ cmd.run_stdout “grep f” stdin=’one\ntwo\nthree\nfour\nfive\n’
salt ‘*’ cmd.script salt://scripts/runme.sh
salt ‘*’ cmd.script salt://scripts/runme.sh ‘arg1 arg2 “arg 3″‘
salt ‘*’ cmd.script salt://scripts/windows_task.ps1 args=’ -Input c:\tmp\infile.txt’ shell=’powershell’
salt ‘*’ cmd.script salt://scripts/runme.sh stdin=’one\ntwo\nthree\nfour\nfive\n’
salt ‘*’ cmd.script_retcode salt://scripts/runme.sh
salt ‘*’ cmd.script_retcode salt://scripts/runme.sh stdin=’one\ntwo\nthree\nfour\nfive\n’
salt ‘*’ cmd.tty tty0 ‘This is a test’
salt ‘*’ cmd.tty pts3 ‘This is a test’
salt ‘*’ cmd.which cat
salt ‘*’ cmd.which_bin ‘[pip2, pip, pip-python]’
salt ‘*’ composer.install /var/www/application
salt ‘*’ composer.install /var/www/application no_dev=True optimize=True
salt ‘*’ config.backup_mode
salt ‘*’ config.dot_vals host
salt ‘*’ config.get pkg:apache
salt ‘*’ config.manage_mode
salt ‘*’ config.merge schedule
salt ‘*’ config.option redis.host
salt ‘*’ config.valid_fileproto salt://path/to/file
salt ‘*’ cp.cache_dir salt://path/to/dir
salt ‘*’ cp.cache_dir salt://path/to/dir include_pat=’E@*.py$’
salt ‘*’ cp.cache_file salt://path/to/file
salt ‘*’ cp.cache_files salt://pathto/file1,salt://pathto/file1
salt ‘*’ cp.cache_local_file /etc/hosts
salt ‘*’ cp.cache_master
salt ‘*’ cp.get_dir salt://path/to/dir/ /minion/dest
salt ‘*’ cp.get_file salt://path/to/file /minion/dest
salt ‘*’ cp.get_file “salt://{{grains.os}}/vimrc” /etc/vimrc template=jinja
salt ‘*’ cp.get_file_str salt://my/file
salt ‘*’ cp.get_template salt://path/to/template /minion/dest
salt ‘*’ cp.get_url salt://my/file /tmp/mine
salt ‘*’ cp.get_url http://www.slashdot.org /tmp/index.html
salt ‘*’ cp.hash_file salt://path/to/file
salt ‘*’ cp.is_cached salt://path/to/file
salt ‘*’ cp.list_master
salt ‘*’ cp.list_master_dirs
salt ‘*’ cp.list_master_symlinks
salt ‘*’ cp.list_minion
salt ‘*’ cp.list_states
salt ‘*’ cp.push /etc/fstab
salt ‘*’ cp.push /usr/lib/mysql
salt ‘*’ cp.push_dir /etc/modprobe.d/ glob=’*.conf’
salt ‘*’ cron.list_tab root
salt ‘*’ cron.list_tab root
salt ‘*’ cron.raw_cron root
salt ‘*’ cron.rm_job root /usr/local/weekly
salt ‘*’ cron.rm_job root /usr/bin/foo dayweek=1
salt ‘*’ cron.rm_env root MAILTO
salt ‘*’ cron.rm_job root /usr/local/weekly
salt ‘*’ cron.rm_job root /usr/bin/foo dayweek=1
salt ‘*’ cron.set_env root MAILTO user@example.com
salt ‘*’ cron.set_job root ‘*’ ‘*’ ‘*’ ‘*’ 1 /usr/local/weekly
salt ‘*’ cron.set_special root @hourly ‘echo foobar’
salt ‘*’ cron.write_cron_file root /tmp/new_cron
salt ‘*’ cron.write_cron_file_verbose root /tmp/new_cron
salt ‘*’ daemontools.available foo
salt ‘*’ daemontools.full_restart <service name>
salt ‘*’ daemontools.get_all
salt ‘*’ daemontools.missing foo
salt ‘*’ daemontools.reload <service name>
salt ‘*’ daemontools.restart <service name>
salt ‘*’ daemontools.start <service name>
salt ‘*’ daemontools.status <service name>
salt ‘*’ daemontools.stop <service name>
salt ‘*’ daemontools.term <service name>
salt ‘*’ data.cas <key> <value> <old_value>
salt ‘*’ data.clear
salt ‘*’ data.dump ‘{‘eggs': ‘spam’}’
salt ‘*’ data.getval <key>
salt ‘*’ data.getvals <key> [<key> …]
salt ‘*’ data.load
salt ‘*’ data.update <key> <value>
salt ‘*’ defaults.get core:users:root
salt ‘*’ disk.blkid
salt ‘*’ disk.blkid /dev/sda
salt ‘*’ disk.inodeusage
salt ‘*’ disk.percent /var
salt ‘*’ disk.usage
salt ‘*’ django.collectstatic <settings_module>
salt ‘*’ django.command <settings_module> <command>
salt ‘*’ django.createsuperuser <settings_module> user user@example.com
salt ‘*’ django.loaddata <settings_module> <comma delimited list of fixtures>
salt ‘*’ django.syncdb <settings_module>
salt ‘*’ dnsmasq.version
salt ‘*’ dnsmasq.get_config
salt ‘*’ dnsmasq.get_config file=/etc/dnsmasq.conf
salt ‘*’ dnsmasq.set_config domain=mydomain.com
salt ‘*’ dnsmasq.set_config follow=False domain=mydomain.com
salt ‘*’ dnsmasq.set_config file=/etc/dnsmasq.conf domain=mydomain.com
salt ‘*’ dnsmasq.version
salt ‘*’ dnsutil.hosts_append /etc/hosts 127.0.0.1 ad1.yuk.co,ad2.yuk.co
salt ‘*’ dnsutil.hosts_remove /etc/hosts ad1.yuk.co
salt ‘*’ dnsutil.hosts_remove /etc/hosts ad2.yuk.co,ad1.yuk.co
salt ‘*’ dnsutil.parse_hosts
salt ‘*’ environ.get foo
salt ‘*’ environ.get baz default=False
salt ‘*’ environ.has_value foo
salt ‘*’ environ.item foo
salt ‘*’ environ.item ‘[foo, baz]’ default=None
salt ‘*’ environ.items
salt ‘*’ environ.setenv ‘{“foo”: “bar”, “baz”: “quux”}’
salt ‘*’ environ.setenv ‘{“a”: “b”, “c”: False}’ false_unsets=True
salt ‘*’ environ.setval foo bar
salt ‘*’ environ.setval baz val=False false_unsets=True
salt ‘*’ event.fire ‘{“data”:”my event data”}’ ‘tag’
salt ‘*’ event.fire_master ‘{“data”:”my event data”}’ ‘tag’
salt ‘*’ extfs.attributes /dev/sda1
salt ‘*’ extfs.blocks /dev/sda1
salt ‘*’ extfs.dump /dev/sda1
salt ‘*’ extfs.mkfs /dev/sda1 fs_type=ext4 opts=’acl,noexec’
salt ‘*’ extfs.tune /dev/sda1 force=True label=wildstallyns opts=’acl,noexec’
salt ‘*’ file.access /path/to/file f
salt ‘*’ file.access /path/to/file x
salt ‘*’ file.append /etc/motd \
salt ‘*’ file.append /etc/motd args=’cheese=spam’
salt ‘*’ file.append /etc/motd args=”[‘cheese=spam’,’spam=cheese’]”
salt ‘*’ file.blockreplace /etc/hosts ‘#– start managed zone foobar : DO NOT EDIT –‘ \
salt ‘*’ file.check_file_meta /etc/httpd/conf.d/httpd.conf salt://http/httpd.conf ‘{hash_type: ‘md5′, ‘hsum': <md5sum>}’ root, root, ‘755’ base
salt ‘*’ file.check_hash /etc/fstab md5:<md5sum>
salt ‘*’ file.check_managed /etc/httpd/conf.d/httpd.conf salt://http/httpd.conf ‘{hash_type: ‘md5′, ‘hsum': <md5sum>}’ root, root, ‘755’ jinja True None None base
salt ‘*’ file.check_managed_changes /etc/httpd/conf.d/httpd.conf salt://http/httpd.conf ‘{hash_type: ‘md5′, ‘hsum': <md5sum>}’ root, root, ‘755’ jinja True None None base
salt ‘*’ file.check_perms /etc/sudoers ‘{}’ root root 400
salt ‘*’ file.chgrp /etc/passwd root
salt ‘*’ file.chown /etc/passwd root root
salt ‘*’ file.comment /etc/modules pcspkr
salt ‘*’ file.contains /etc/crontab ‘mymaintenance.sh’
salt ‘*’ file.contains_glob /etc/foobar ‘*cheese*’
salt ‘*’ file.contains_regex /etc/crontab
salt ‘*’ file.contains_regex_multiline /etc/crontab ‘^maint’
salt ‘*’ file.copy /path/to/src /path/to/dst
salt ‘*’ file.copy /path/to/src_dir /path/to/dst_dir recurse=True
salt ‘*’ file.copy /path/to/src_dir /path/to/dst_dir recurse=True remove_existing=True
salt ‘*’ file.restore_backup /foo/bar/baz.txt 0
salt ‘*’ file.directory_exists /etc
salt ‘*’ file.extract_hash /etc/foo sha512 /path/to/hash/file
salt ‘*’ file.file_exists /etc/passwd
salt ‘*’ file.find / type=f name=\*.bak size=+10m
salt ‘*’ file.find /var mtime=+30d size=+10m print=path,size,mtime
salt ‘*’ file.find /var/log name=\*.[0-9] mtime=+30d size=+10m delete
salt ‘*’ file.get_devmm /dev/chr
salt ‘*’ file.get_diff /home/fred/.vimrc salt://users/fred/.vimrc
salt ‘*’ file.get_gid /etc/passwd
salt ‘*’ file.get_group /etc/passwd
salt ‘*’ file.get_hash /etc/shadow
salt ‘*’ file.get_managed /etc/httpd/conf.d/httpd.conf jinja salt://http/httpd.conf ‘{hash_type: ‘md5′, ‘hsum': <md5sum>}’ root root ‘755’ base None None
salt ‘*’ file.get_mode /etc/passwd
salt ‘*’ file.get_selinux_context /etc/hosts
salt ‘*’ file.get_sum /etc/passwd sha512
salt ‘*’ file.get_uid /etc/passwd
salt ‘*’ file.get_user /etc/passwd
salt ‘*’ file.gid_to_group 0
salt ‘*’ file.grep /etc/passwd nobody
salt ‘*’ file.grep /etc/sysconfig/network-scripts/ifcfg-eth0 ipaddr ” -i”
salt ‘*’ file.grep /etc/sysconfig/network-scripts/ifcfg-eth0 ipaddr ” -i -B2″
salt ‘*’ file.grep “/etc/sysconfig/network-scripts/*” ipaddr ” -i -l
salt ‘*’ file.group_to_gid root
salt ‘*’ file.is_blkdev /dev/blk
salt ‘*’ file.is_chrdev /dev/chr
salt ‘*’ file.is_fifo /dev/fifo
salt ‘*’ file.is_link /path/to/link
salt ‘*’ file.join ‘/’ ‘usr’ ‘local’ ‘bin’
salt ‘*’ file.chown /etc/passwd root root
salt ‘*’ file.link /path/to/file /path/to/link
salt ‘*’ file.list_backups /foo/bar/baz.txt
salt ‘*’ file.list_backups /foo/bar/baz.txt
salt ‘*’ file.lstat /path/to/file
salt ‘*’ file.makedirs /opt/code/
salt ‘*’ file.makedirs_perms /opt/code
salt ‘*’ file.manage_file /etc/httpd/conf.d/httpd.conf ” ‘{}’ salt://http/httpd.conf ‘{hash_type: ‘md5′, ‘hsum': <md5sum>}’ root root ‘755’ base ”
salt ‘*’ file.mkdir /opt/jetty/context
salt ‘*’ file.mknod /dev/chr c 180 31
salt ‘*’ file.mknod /dev/blk b 8 999
salt ‘*’ file.nknod /dev/fifo p
salt ‘*’ file.mknod_blkdev /dev/blk 8 999
salt ‘*’ file.mknod_chrdev /dev/chr 180 31
salt ‘*’ file.mknod_fifo /dev/fifo
salt ‘*’ file.open_files
salt ‘*’ file.open_files by_pid=True
salt ‘*’ file.pardir
salt ‘*’ file.patch /opt/file.txt /tmp/file.txt.patch
salt ‘*’ file.path_exists_glob /etc/pam*/pass*
salt ‘*’ file.prepend /etc/motd \
salt ‘*’ file.prepend /etc/motd args=’cheese=spam’
salt ‘*’ file.prepend /etc/motd args=”[‘cheese=spam’,’spam=cheese’]”
salt ‘*’ file.sed /etc/httpd/httpd.conf ‘LogLevel warn’ ‘LogLevel info’
salt ‘*’ file.readdir /path/to/dir/
salt ‘*’ file.readlink /path/to/link
salt ‘*’ file.remove /tmp/foo
salt ‘*’ file.restore_backup /foo/bar/baz.txt 0
salt ‘*’ file.rename /path/to/src /path/to/dst
salt ‘*’ file.replace /path/to/file pattern=”bind-address\s*=” repl=’bind-address:’
salt ‘*’ file.replace /path/to/file pattern=’=’ repl=':’
salt ‘*’ file.replace /etc/httpd/httpd.conf pattern=’LogLevel warn’ repl=’LogLevel info’
salt ‘*’ file.replace /some/file pattern=’before’ repl=’after’ flags='[MULTILINE, IGNORECASE]’
salt ‘*’ file.restore_backup /foo/bar/baz.txt 0
salt ‘*’ file.restorecon /home/user/.ssh/authorized_keys
salt ‘*’ file.rmdir /tmp/foo/
salt ‘*’ file.search /etc/crontab ‘mymaintenance.sh’
salt ‘*’ file.sed /etc/httpd/httpd.conf ‘LogLevel warn’ ‘LogLevel info’
salt ‘*’ file.contains /etc/crontab ‘mymaintenance.sh’
salt ‘*’ file.seek_read /path/to/file 4096 0
salt ‘*’ file.seek_write /path/to/file ‘some data’ 4096
salt ‘*’ file.set_mode /etc/passwd 0644
salt ‘*’ file.set_selinux_context path <role> <type> <range>
salt ‘*’ file.source_list salt://http/httpd.conf ‘{hash_type: ‘md5′, ‘hsum': <md5sum>}’ base
salt ‘*’ file.stats /etc/passwd
salt ‘*’ file.statvfs /path/to/file
salt ‘*’ file.symlink /path/to/file /path/to/link
salt ‘*’ file.touch /var/log/emptyfile
salt ‘*’ file.truncate /path/to/file 512
salt ‘*’ file.uid_to_user 0
salt ‘*’ file.uncomment /etc/hosts.deny ‘ALL: PARANOID’
salt ‘*’ file.user_to_uid root
salt ‘*’ file.write /etc/motd \
salt ‘*’ file.write /etc/motd args=’cheese=spam’
salt ‘*’ file.write /etc/motd args=”[‘cheese=spam’,’spam=cheese’]”
salt ‘*’ gem.install vagrant
salt ‘*’ gem.list
salt ‘*’ gem.sources_add http://rubygems.org/
salt ‘*’ gem.sources_list
salt ‘*’ gem.sources_remove http://rubygems.org/
salt ‘*’ gem.uninstall vagrant
salt ‘*’ gem.update vagrant
salt ‘*’ gem.update_system
salt ‘*’ grains.append key val
salt ‘*’ grains.delval key
salt ‘*’ grains.filter_by ‘{Debian: Debheads rule, RedHat: I love my hat}’
salt ‘*’ grains.filter_by ‘{A: B, C: {D: {E: F,G: H}}}’ ‘xxx’ ‘{D: {E: I},J: K}’ ‘C’
salt ‘*’ grains.get pkg:apache
salt ‘*’ grains.get_or_set_hash ‘django:SECRET_KEY’ 50
salt ‘*’ grains.has_value pkg:apache
salt ‘*’ grains.item os
salt ‘*’ grains.item os osrelease oscodename
salt ‘*’ grains.item host sanitize=True
salt ‘*’ grains.items
salt ‘*’ grains.items sanitize=True
salt ‘*’ grains.ls
salt ‘*’ grains.remove key val
salt ‘*’ grains.setval key val
salt ‘*’ grains.setval key “{‘sub-key': ‘val’, ‘sub-key2′: ‘val2′}”
salt ‘*’ grains.setvals “{‘key1′: ‘val1′, ‘key2′: ‘val2′}”
salt ‘*’ group.add foo 3456
salt ‘*’ group.adduser foo bar
salt ‘*’ group.chgid foo 4376
salt ‘*’ group.delete foo
salt ‘*’ group.deluser foo bar
salt ‘*’ group.getent
salt ‘*’ group.info foo
salt ‘*’ group.members foo ‘user1,user2,user3,…’
salt ‘*’ grub.conf
salt ‘*’ grub.version
salt ‘*’ hashutil.base64_decodestring ‘Z2V0IHNhbHRlZA==
salt ‘*’ hashutil.base64_encodestring ‘get salted’
salt ‘*’ hashutil.hmac_signature ‘get salted’ ‘shared secret’ ‘NS2BvKxFRk+rndAlFbCYIFNVkPtI/3KiIYQw4okNKU8=’
salt ‘*’ hashutil.md5_digest ‘get salted’
salt ‘*’ hashutil.sha256_digest ‘get salted’
salt ‘*’ hashutil.sha512_digest ‘get salted’
salt ‘*’ hg.archive /path/to/repo output=/tmp/archive.tgz fmt=tgz
salt ‘*’ hg.clone /path/to/repo https://bitbucket.org/birkenfeld/sphinx
salt ‘*’ hg.describe /path/to/repo
salt ‘*’ hg.pull /path/to/repo opts=-u
salt ‘*’ hg.revision /path/to/repo mybranch
salt ‘*’ hosts.add_host <ip> <alias>
salt ‘*’ hosts.get_alias <ip addr>
salt ‘*’ hosts.get_ip <hostname>
salt ‘*’ hosts.has_pair <ip> <alias>
salt ‘*’ hosts.list_hosts
salt ‘*’ hosts.rm_host <ip> <alias>
salt ‘*’ hosts.set_host <ip> <alias>
salt ‘*’ img.bootstrap /srv/salt-images/host.qcow 4096 qcow2
salt ‘*’ img.mount_image /tmp/foo
salt ‘*’ img.mount_image /tmp/foo
salt ‘*’ img.umount_image /mnt/foo
salt ‘*’ incron.list_tab root
salt ‘*’ incron.list_tab root
salt ‘*’ incron.raw_cron root
salt ‘*’ incron.raw_system_cron
salt ‘*’ incron.rm_job root /path
salt ‘*’ incron.rm_job root /path
salt ‘*’ incron.set_job root ‘/root’ ‘IN_MODIFY’ ‘echo “$$ $@ $# $% $&”‘
salt ‘*’ incron.write_incron_file_verbose root /tmp/new_cron
salt ‘*’ incron.write_cron_file root /tmp/new_cron
salt ‘*’ ini.get_option /path/to/ini section_name option_name
salt ‘*’ ini.get_section /path/to/ini section_name
salt ‘*’ ini.remove_option /path/to/ini section_name option_name
salt ‘*’ ini.remove_section /path/to/ini section_name
salt ‘*’ ini.set_option /path/to/ini ‘{section_foo: {key: value}}’
salt ‘*’ ip.apply_network_settings
salt ‘*’ ip.build_bond bond0 mode=balance-alb
salt ‘*’ ip.build_interface eth0 eth <settings>
salt ‘*’ ip.build_network_settings <settings>
salt ‘*’ ip.build_routes eth0 <settings>
salt ‘*’ ip.down eth0
salt ‘*’ ip.get_bond bond0
salt ‘*’ ip.get_interface eth0
salt ‘*’ ip.get_network_settings
salt ‘*’ ip.get_routes eth0
salt ‘*’ ip.up eth0
salt ‘*’ iptables.append filter INPUT \
salt ‘*’ iptables.append filter INPUT \
salt ‘*’ iptables.build_rule match=state \
salt ‘*’ iptables.build_rule filter INPUT command=I position=3 \
salt ‘*’ iptables.build_rule filter INPUT command=A \
salt ‘*’ iptables.build_rule filter INPUT command=A \
salt ‘*’ iptables.build_rule filter INPUT command=A \
salt ‘*’ iptables.build_rule match=state \
salt ‘*’ iptables.build_rule filter INPUT command=I position=3 \
salt ‘*’ iptables.check filter INPUT \
salt ‘*’ iptables.check filter INPUT \
salt ‘*’ iptables.check_chain filter INPUT
salt ‘*’ iptables.check_chain filter INPUT family=ipv6
salt ‘*’ iptables.delete filter INPUT position=3
salt ‘*’ iptables.delete filter INPUT \
salt ‘*’ iptables.delete filter INPUT position=3 family=ipv6
salt ‘*’ iptables.delete filter INPUT \
salt ‘*’ iptables.delete_chain filter CUSTOM_CHAIN
salt ‘*’ iptables.delete_chain filter CUSTOM_CHAIN family=ipv6
salt ‘*’ iptables.flush filter INPUT
salt ‘*’ iptables.flush filter INPUT family=ipv6
salt ‘*’ iptables.get_policy filter INPUT
salt ‘*’ iptables.get_policy filter INPUT family=ipv6
salt ‘*’ iptables.get_rules
salt ‘*’ iptables.get_rules family=ipv6
salt ‘*’ iptables.get_saved_policy filter INPUT
salt ‘*’ iptables.get_saved_policy filter INPUT \
salt ‘*’ iptables.get_saved_policy filter INPUT family=ipv6
salt ‘*’ iptables.get_saved_policy filter INPUT \
salt ‘*’ iptables.get_saved_rules
salt ‘*’ iptables.get_saved_rules family=ipv6
salt ‘*’ iptables.insert filter INPUT position=3 \
salt ‘*’ iptables.insert filter INPUT position=3 \
salt ‘*’ iptables.new_chain filter CUSTOM_CHAIN
salt ‘*’ iptables.new_chain filter CUSTOM_CHAIN family=ipv6
salt ‘*’ iptables.save /etc/sysconfig/iptables
salt ‘*’ iptables.save /etc/sysconfig/iptables family=ipv6
salt ‘*’ iptables.set_policy filter INPUT ACCEPT
salt ‘*’ iptables.set_policy filter INPUT ACCEPT family=ipv6
salt ‘*’ iptables.version
salt ‘*’ iptables.version family=ipv6
salt ‘*’ key.finger
salt ‘*’ key.finger_master
salt ‘*’ kmod.available
salt ‘*’ kmod.check_available kvm
salt ‘*’ kmod.is_loaded kvm
salt ‘*’ kmod.load kvm
salt ‘*’ kmod.lsmod
salt ‘*’ kmod.mod_list
salt ‘*’ kmod.remove kvm
salt ‘*’ locale.avail ‘en_US.UTF-8′
salt ‘*’ locale.gen_locale ‘en_US.UTF-8′
salt ‘*’ locale.get_locale
salt ‘*’ locale.list_avail
salt ‘*’ locale.set_locale ‘en_US.UTF-8′
salt ‘*’ locate.locate
salt ‘*’ locate.stats
salt ‘*’ locate.updatedb
salt ‘*’ locate.version
salt ‘*’ logrotate.set rotate 2
salt ‘*’ logrotate.set /var/log/wtmp rotate 2
salt ‘*’ logrotate.show_conf
salt ‘*’ lowpkg.file_dict httpd
salt ‘*’ lowpkg.file_dict httpd postfix
salt ‘*’ lowpkg.file_dict
salt ‘*’ lowpkg.file_list httpd
salt ‘*’ lowpkg.file_list httpd postfix
salt ‘*’ lowpkg.file_list
salt ‘*’ lowpkg.list_pkgs
salt ‘*’ lowpkg.verify
salt ‘*’ lowpkg.verify httpd
salt ‘*’ lowpkg.verify ‘httpd postfix’
salt ‘*’ lowpkg.verify ‘httpd postfix’ ignore_types=[‘config’,’doc’]
salt ‘*’ lvm.fullversion
salt ‘*’ lvm.lvcreate new_volume_name vg_name size=10G
salt ‘*’ lvm.lvcreate new_volume_name vg_name extents=100 /dev/sdb
salt ‘*’ lvm.lvcreate new_snapshot vg_name snapshot=volume_name size=3G
salt ‘*’ lvm.lvdisplay
salt ‘*’ lvm.lvdisplay /dev/vg_myserver/root
salt ‘*’ lvm.lvremove lvname vgname force=True
salt ‘*’ lvm.pvdisplay
salt ‘*’ lvm.pvdisplay /dev/md0
salt ‘*’ lvm.version
salt ‘*’ lvm.vgdisplay
salt ‘*’ lvm.vgdisplay nova-volumes
salt ‘*’ match.compound ‘L@cheese,foo and *’
salt ‘*’ match.data ‘spam:eggs’
salt ‘*’ match.filter_by ‘{foo*: Foo!, bar*: Bar!}’ minion_id=bar03
salt ‘*’ match.glob ‘*’
salt ‘*’ match.grain ‘os:Ubuntu’
salt ‘*’ match.grain ‘ipv6|2001:db8::ff00:42:8329′ delimiter=’|’
salt ‘*’ match.grain_pcre ‘os:Fedo.*’
salt ‘*’ match.grain_pcre ‘ipv6|2001:.*’ delimiter=’|’
salt ‘*’ match.ipcidr ‘192.168.44.0/24′
salt ‘*’ match.list ‘server1,server2′
salt ‘*’ match.pcre ‘.*’
salt ‘*’ match.pillar ‘cheese:foo’
salt ‘*’ match.pillar ‘clone_url|https://github.com/saltstack/salt.git’ delimiter=’|’
salt ‘*’ mine.delete ‘network.interfaces’
salt ‘*’ mine.flush
salt ‘*’ mine.get ‘*’ network.interfaces
salt ‘*’ mine.get ‘os:Fedora’ network.interfaces grain
salt ‘*’ mine.get ‘os:Fedora and S@192.168.5.0/24′ network.ipaddrs compound
salt ‘*’ mine.get_docker
salt ‘*’ mine.get_docker interfaces=’eth0′
salt ‘*’ mine.get_docker interfaces='[“eth0″, “eth1″]’
salt ‘*’ mine.get_docker cidrs=’107.170.147.0/24′
salt ‘*’ mine.get_docker cidrs='[“107.170.147.0/24″, “172.17.42.0/24″]’
salt ‘*’ mine.get_docker interfaces='[“eth0″, “eth1″]’ cidrs='[“107.170.147.0/24″, “172.17.42.0/24″]’
salt ‘*’ mine.send network.interfaces eth0
salt ‘*’ mine.update
salt ‘*’ modjk.bulk_activate node1,node2,node3 loadbalancer1
salt ‘*’ modjk.bulk_activate node1,node2,node3 loadbalancer1 other-profile
salt ‘*’ modjk.bulk_activate [“node1″,”node2″,”node3″] loadbalancer1
salt ‘*’ modjk.bulk_activate [“node1″,”node2″,”node3″] loadbalancer1 other-profile
salt ‘*’ modjk.bulk_disable node1,node2,node3 loadbalancer1
salt ‘*’ modjk.bulk_disable node1,node2,node3 loadbalancer1 other-profile
salt ‘*’ modjk.bulk_disable [“node1″,”node2″,”node3″] loadbalancer1
salt ‘*’ modjk.bulk_disable [“node1″,”node2″,”node3″] loadbalancer1 other-profile
salt ‘*’ modjk.bulk_recover node1,node2,node3 loadbalancer1
salt ‘*’ modjk.bulk_recover node1,node2,node3 loadbalancer1 other-profile
salt ‘*’ modjk.bulk_recover [“node1″,”node2″,”node3″] loadbalancer1
salt ‘*’ modjk.bulk_recover [“node1″,”node2″,”node3″] loadbalancer1 other-profile
salt ‘*’ modjk.bulk_stop node1,node2,node3 loadbalancer1
salt ‘*’ modjk.bulk_stop node1,node2,node3 loadbalancer1 other-profile
salt ‘*’ modjk.bulk_stop [“node1″,”node2″,”node3″] loadbalancer1
salt ‘*’ modjk.bulk_stop [“node1″,”node2″,”node3″] loadbalancer1 other-profile
salt ‘*’ modjk.dump_config
salt ‘*’ modjk.dump_config other-profile
salt ‘*’ modjk.get_running
salt ‘*’ modjk.get_running other-profile
salt ‘*’ modjk.lb_edit loadbalancer1 “{‘vlr': 1, ‘vlt': 60}”
salt ‘*’ modjk.lb_edit loadbalancer1 “{‘vlr': 1, ‘vlt': 60}” other-profile
salt ‘*’ modjk.list_configured_members loadbalancer1
salt ‘*’ modjk.list_configured_members loadbalancer1 other-profile
salt ‘*’ modjk.recover_all loadbalancer1
salt ‘*’ modjk.recover_all loadbalancer1 other-profile
salt ‘*’ modjk.reset_stats loadbalancer1
salt ‘*’ modjk.reset_stats loadbalancer1 other-profile
salt ‘*’ modjk.version
salt ‘*’ modjk.version other-profile
salt ‘*’ modjk.worker_activate node1 loadbalancer1
salt ‘*’ modjk.worker_activate node1 loadbalancer1 other-profile
salt ‘*’ modjk.worker_disable node1 loadbalancer1
salt ‘*’ modjk.worker_disable node1 loadbalancer1 other-profile
salt ‘*’ modjk.worker_edit node1 loadbalancer1 “{‘vwf': 500, ‘vwd': 60}”
salt ‘*’ modjk.worker_edit node1 loadbalancer1 “{‘vwf': 500, ‘vwd': 60}” other-profile
salt ‘*’ modjk.worker_recover node1 loadbalancer1
salt ‘*’ modjk.worker_recover node1 loadbalancer1 other-profile
salt ‘*’ modjk.worker_status node1
salt ‘*’ modjk.worker_status node1 other-profile
salt ‘*’ modjk.worker_activate node1 loadbalancer1
salt ‘*’ modjk.worker_activate node1 loadbalancer1 other-profile
salt ‘*’ modjk.workers
salt ‘*’ modjk.workers other-profile
salt ‘*’ mount.active
salt ‘*’ mount.fstab
salt ‘*’ mount.is_fuse_exec sshfs
salt ‘*’ mount.is_mounted /mnt/share
salt ‘*’ mount.mount /mnt/foo /dev/sdz1 True
salt ‘*’ mount.remount /mnt/foo /dev/sdz1 True
salt ‘*’ mount.rm_fstab /mnt/foo
salt ‘*’ mount.set_fstab /mnt/foo /dev/sdz1 ext4
salt ‘*’ mount.swapoff /root/swapfile
salt ‘*’ mount.swapon /root/swapfile
salt ‘*’ mount.swaps
salt ‘*’ mount.umount /mnt/foo
salt ‘*’ network.active_tcp
salt ‘*’ network.arp
salt ‘*’ network.connect archlinux.org 80
salt ‘*’ network.connect archlinux.org 80 timeout=3
salt ‘*’ network.connect archlinux.org 80 timeout=3 family=ipv4
salt ‘*’ network.connect google-public-dns-a.google.com port=53 proto=udp timeout=3
salt ‘*’ network.dig archlinux.org
salt ‘*’ network.get_hostname
salt ‘*’ network.hw_addr eth0
salt ‘*’ network.hw_addr eth0
salt ‘*’ network.in_subnet 10.0.0.0/16
salt ‘*’ network.interface eth0
salt ‘*’ network.interface_ip eth0
salt ‘*’ network.interfaces
salt ‘*’ network.ip_addrs
salt ‘*’ network.ip_addrs6
salt ‘*’ network.ip_addrs
salt ‘*’ network.ip_addrs6
salt ‘*’ network.is_loopback 127.0.0.1
salt ‘*’ network.is_private 10.0.0.3
salt ‘*’ network.mod_hostname master.saltstack.com
salt ‘*’ network.netstat
salt ‘*’ network.ping archlinux.org
salt ‘*’ network.subnets
salt ‘*’ network.traceroute archlinux.org
salt ‘*’ pillar.items
salt ‘*’ pillar.ext ‘{libvirt: _}’
salt ‘*’ pillar.get pkg:apache
salt ‘*’ pillar.item foo
salt ‘*’ pillar.item foo bar baz
salt ‘*’ pillar.items
salt ‘*’ pillar.raw
salt ‘*’ pillar.raw key=’roles’
salt ‘*’ pip.freeze /home/code/path/to/virtualenv/
salt ‘*’ pip.install <package name>,<package2 name>
salt ‘*’ pip.install requirements=/path/to/requirements.txt
salt ‘*’ pip.install <package name> bin_env=/path/to/virtualenv
salt ‘*’ pip.install <package name> bin_env=/path/to/pip_bin
salt ‘*’ pip.install markdown,django editable=git+https://github.com/worldcompany/djangoembed.git#egg=djangoembed upgrade=True no_deps=True
salt ‘*’ pip.list salt
salt ‘*’ pip.uninstall <package name>,<package2 name>
salt ‘*’ pip.uninstall requirements=/path/to/requirements.txt
salt ‘*’ pip.uninstall <package name> bin_env=/path/to/virtualenv
salt ‘*’ pip.uninstall <package name> bin_env=/path/to/pip_bin
salt ‘*’ pip.version
salt ‘*’ pkg.latest_version <package name>
salt ‘*’ pkg.latest_version <package name> fromrepo=epel-testing
salt ‘*’ pkg.latest_version <package name> disableexcludes=main
salt ‘*’ pkg.latest_version <package1> <package2> <package3> …
salt ‘*’ pkg.check_db <package1> <package2> <package3>
salt ‘*’ pkg.check_db <package1> <package2> <package3> fromrepo=epel-testing
salt ‘*’ pkg.check_db <package1> <package2> <package3> disableexcludes=main
salt ‘*’ pkg.clean_metadata
salt ‘*’ pkg.del_repo myrepo
salt ‘*’ pkg.del_repo myrepo basedir=/path/to/dir
salt ‘*’ pkg.file_list httpd
salt ‘*’ pkg.file_list httpd postfix
salt ‘*’ pkg.file_list
salt ‘*’ pkg.file_list httpd
salt ‘*’ pkg.file_list httpd postfix
salt ‘*’ pkg.file_list
salt ‘*’ pkg.get_locked_packages
salt ‘*’ pkg.get_repo myrepo
salt ‘*’ pkg.get_repo myrepo basedir=/path/to/dir
salt ‘*’ pkg.group_diff ‘Perl Support’
salt ‘*’ pkg.group_info ‘Perl Support’
salt ‘*’ pkg.group_install ‘Group 1′
salt ‘*’ pkg.group_install ‘Group 1,Group 2′
salt ‘*’ pkg.group_install ‘[“Group 1″, “Group 2″]’
salt ‘*’ pkg.group_install ‘My Group’ skip=’foo,bar’
salt ‘*’ pkg.group_install ‘My Group’ skip='[“foo”, “bar”]’
salt ‘*’ pkg.group_install ‘My Group’ include=’foo,bar’
salt ‘*’ pkg.group_install ‘My Group’ include='[“foo”, “bar”]’
salt ‘*’ pkg.group_list
salt ‘*’ pkg.hold <package name>
salt ‘*’ pkg.hold pkgs='[“foo”, “bar”]’
salt ‘*’ pkg.install <package name>
salt ‘*’ pkg.install pkgs='[“foo”, “bar”]’
salt ‘*’ pkg.install pkgs='[“foo”, {“bar”: “1.2.3-4.el5″}]’
salt ‘*’ pkg.install sources='[{“foo”: “salt://foo.rpm”}, {“bar”: “salt://bar.rpm”}]’
salt ‘*’ pkg.latest_version <package name>
salt ‘*’ pkg.latest_version <package name> fromrepo=epel-testing
salt ‘*’ pkg.latest_version <package name> disableexcludes=main
salt ‘*’ pkg.latest_version <package1> <package2> <package3> …
salt ‘*’ pkg.list_pkgs
salt ‘*’ pkg.list_repo_pkgs
salt ‘*’ pkg.list_repo_pkgs foo bar baz
salt ‘*’ pkg.list_repo_pkgs ‘samba4*’ fromrepo=base,updates
salt ‘*’ pkg.list_repos
salt ‘*’ pkg.list_upgrades
salt ‘*’ pkg.mod_repo reponame enabled=1 gpgcheck=1
salt ‘*’ pkg.mod_repo reponame basedir=/path/to/dir enabled=1
salt ‘*’ pkg.mod_repo reponame baseurl= mirrorlist=http://host.com/
salt ‘*’ pkg.normalize_name zsh.x86_64
salt ‘*’ pkg.owner /usr/bin/apachectl
salt ‘*’ pkg.owner /usr/bin/apachectl /etc/httpd/conf/httpd.conf
salt ‘*’ pkg.purge <package name>
salt ‘*’ pkg.purge <package1>,<package2>,<package3>
salt ‘*’ pkg.purge pkgs='[“foo”, “bar”]’
salt ‘*’ pkg.refresh_db
salt ‘*’ pkg.remove <package name>
salt ‘*’ pkg.remove <package1>,<package2>,<package3>
salt ‘*’ pkg.remove pkgs='[“foo”, “bar”]’
salt ‘*’ pkg.unhold <package name>
salt ‘*’ pkg.unhold pkgs='[“foo”, “bar”]’
salt ‘*’ pkg.upgrade
salt ‘*’ pkg.upgrade_available <package name>
salt ‘*’ pkg.verify
salt ‘*’ pkg.verify httpd
salt ‘*’ pkg.verify ‘httpd postfix’
salt ‘*’ pkg.verify ‘httpd postfix’ ignore_types=[‘config’,’doc’]
salt ‘*’ pkg.version <package name>
salt ‘*’ pkg.version <package1> <package2> <package3> …
salt ‘*’ pkg_resource.add_pkg ‘{}’ bind 9
salt ‘*’ pkg_resource.check_extra_requirements <pkgname> <extra_requirements>
salt ‘*’ pkg_resource.pack_sources ‘[{“foo”: “salt://foo.rpm”}, {“bar”: “salt://bar.rpm”}]’
salt ‘*’ pkg_resource.parse_targets
salt ‘*’ pkg_resource.sort_pkglist ‘[“3.45″, “2.13”]’
salt ‘*’ pkg_resource.stringify ‘vim: 7.127′
salt ‘*’ pkg_resource.version vim
salt ‘*’ pkg_resource.version foo bar baz
salt ‘*’ pkg_resource.version ‘python*’
salt ‘*’ pkg_resource.version_clean <version_string>
salt ‘*’ publish.full_data test.kwarg arg=’cheese=spam’
salt ‘*’ publish.publish test.kwarg arg=’cheese=spam’
salt ‘*’ pyenv.default
salt ‘*’ pyenv.default 2.0.0-p0
salt ‘*’ pyenv.do ‘gem list bundler’
salt ‘*’ pyenv.do ‘gem list bundler’ deploy
salt ‘*’ pyenv.do_with_python 2.0.0-p0 ‘gem list bundler’
salt ‘*’ pyenv.do_with_python 2.0.0-p0 ‘gem list bundler’ deploy
salt ‘*’ pyenv.install
salt ‘*’ pyenv.install_python 2.0.0-p0
salt ‘*’ pyenv.is_installed
salt ‘*’ pyenv.list
salt ‘*’ pyenv.rehash
salt ‘*’ pyenv.uninstall_python 2.0.0-p0
salt ‘*’ pyenv.update
salt ‘*’ pyenv.versions
salt ‘*’ raid.assemble /dev/md0 [‘/dev/xvdd’, ‘/dev/xvde’]
salt ‘*’ raid.create /dev/md0 level=1 chunk=256 devices=”[‘/dev/xvdd’, ‘/dev/xvde’]” test_mode=True
salt ‘*’ raid.detail /dev/md0
salt ‘*’ raid.destroy /dev/md0
salt ‘*’ raid.detail ‘/dev/md0′
salt ‘*’ raid.list
salt ‘*’ raid.save_config
salt ‘*’ random.get_str 128
salt ‘*’ random.hash ‘I am a string’ md5
salt ‘*’ random.shadow_hash ‘My5alT’ ‘MyP@asswd’ md5
salt ‘*’ random.str_encode ‘I am a new string’ base64
salt ‘*’ rbenv.default
salt ‘*’ rbenv.default 2.0.0-p0
salt ‘*’ rbenv.do ‘gem list bundler’
salt ‘*’ rbenv.do ‘gem list bundler’ deploy
salt ‘*’ rbenv.do_with_ruby 2.0.0-p0 ‘gem list bundler’
salt ‘*’ rbenv.do_with_ruby 2.0.0-p0 ‘gem list bundler’ deploy
salt ‘*’ rbenv.install
salt ‘*’ rbenv.install_ruby 2.0.0-p0
salt ‘*’ rbenv.is_installed
salt ‘*’ rbenv.list
salt ‘*’ rbenv.rehash
salt ‘*’ rbenv.uninstall_ruby 2.0.0-p0
salt ‘*’ rbenv.update
salt ‘*’ rbenv.versions
salt ‘*’ ret.get_fun mysql network.interfaces
salt ‘*’ ret.get_jid redis 20421104181954700505
salt ‘*’ ret.get_jids mysql
salt ‘*’ ret.get_minions mysql
salt ‘*’ rsync.config
salt ‘*’ rsync.rsync {src} {dst} {delete=True} {update=True} {passwordfile=/etc/pass.crt} {exclude=xx}
salt ‘*’ rsync.rsync {src} {dst} {delete=True} {excludefrom=/xx.ini}
salt ‘*’ rsync.version
salt ‘*’ rvm.do 2.0.0 <command>
salt ‘*’ rvm.gemset_copy foobar bazquo
salt ‘*’ rvm.gemset_create 2.0.0 foobar
salt ‘*’ rvm.gemset_delete 2.0.0 foobar
salt ‘*’ rvm.gemset_empty 2.0.0 foobar
salt ‘*’ rvm.gemset_list
salt ‘*’ rvm.gemset_list_all
salt ‘*’ rvm.get
salt ‘*’ rvm.install
salt ‘*’ rvm.install_ruby 1.9.3-p385
salt ‘*’ rvm.is_installed
salt ‘*’ rvm.list
salt ‘*’ rvm.reinstall_ruby 1.9.3-p385
salt ‘*’ rvm.rubygems 2.0.0 1.8.24
salt ‘*’ rvm.set_default 2.0.0
salt ‘*’ rvm.wrapper <ruby_string> <wrapper_prefix>
salt ‘*’ saltutil.clear_cache
salt ‘*’ saltutil.cmd
salt ‘*’ saltutil.cmd
salt ‘*’ saltutil.find_cached_job <job id>
salt ‘*’ saltutil.find_job <job id>
salt ‘*’ saltutil.is_running state.highstate
salt ‘*’ saltutil.kill_job <job id>
salt ‘*’ saltutil.mmodule base test.ping
salt ‘*’ saltutil.refresh_modules
salt ‘*’ saltutil.refresh_pillar
salt ‘*’ saltutil.regen_keys
salt ‘*’ saltutil.revoke_auth
salt ‘*’ saltutil.runner jobs.list_jobs
salt ‘*’ saltutil.running
salt ‘*’ saltutil.signal_job <job id> 15
salt ‘*’ saltutil.sync_all
salt ‘*’ saltutil.sync_grains
salt ‘*’ saltutil.sync_modules
salt ‘*’ saltutil.sync_outputters
salt ‘*’ saltutil.sync_renderers
salt ‘*’ saltutil.sync_returners
salt ‘*’ saltutil.sync_states
salt ‘*’ saltutil.sync_utils
salt ‘*’ saltutil.term_job <job id>
salt ‘*’ saltutil.update
salt ‘*’ saltutil.update 0.10.3
salt ‘*’ saltutil.wheel key.accept match=jerry
salt ‘*’ schedule.add job1 function=’test.ping’ seconds=3600
salt ‘*’ schedule.build_schedule_item job1 function=’test.ping’ seconds=3600
salt ‘*’ schedule.delete job1
salt ‘*’ schedule.disable
salt ‘*’ schedule.disable_job job1
salt ‘*’ schedule.enable
salt ‘*’ schedule.enable_job job1
salt ‘*’ schedule.list
salt ‘*’ schedule.list show_all=True
salt ‘*’ schedule.modify job1 function=’test.ping’ seconds=3600
salt ‘*’ schedule.purge
salt ‘*’ schedule.reload
salt ‘*’ schedule.run_job job1
salt ‘*’ schedule.run_job job1 force=True
salt ‘*’ schedule.save
salt ‘minion’ seed.apply path id [config=config_data] \
salt ‘minion’ seed.mkconfig [config=config_data] [tmp=tmp_dir] \
salt ‘*’ serverdensity_device.create lama
salt ‘*’ serverdensity_device.create rich_lama group=lama_band installedRAM=32768
salt ‘*’ serverdensity_device.delete 51f7eafcdba4bb235e000ae4
salt ‘*’ serverdensity_device.get_sd_auth <val>
salt ‘*’ serverdensity_device.install_agent c2bbdd6689ff46282bdaa07555641498
salt ‘*’ serverdensity_device.ls
salt ‘*’ serverdensity_device.ls name=lama
salt ‘*’ serverdensity_device.ls name=lama group=lama_band installedRAM=32768
salt ‘*’ serverdensity_device.update 51f7eafcdba4bb235e000ae4 name=lama group=lama_band
salt ‘*’ serverdensity_device.update 51f7eafcdba4bb235e000ae4 name=better_lama group=rock_lamas swapSpace=512
salt ‘*’ service.available sshd
salt ‘*’ service.available sshd limit=upstart
salt ‘*’ service.available sshd limit=sysvinit
salt ‘*’ service.disable <service name>
salt ‘*’ service.disabled <service name>
salt ‘*’ service.enable <service name>
salt ‘*’ service.enabled <service name>
salt ‘*’ service.get_all
salt ‘*’ service.get_all limit=upstart
salt ‘*’ service.get_all limit=sysvinit
salt ‘*’ service.get_disabled
salt ‘*’ service.get_disabled limit=upstart
salt ‘*’ service.get_disabled limit=sysvinit
salt ‘*’ service.get_enabled
salt ‘*’ service.get_enabled limit=upstart
salt ‘*’ service.get_enabled limit=sysvinit
salt ‘*’ service.missing sshd
salt ‘*’ service.missing sshd limit=upstart
salt ‘*’ service.missing sshd limit=sysvinit
salt ‘*’ service.reload <service name>
salt ‘*’ service.restart <service name>
salt ‘*’ service.start <service name>
salt ‘*’ service.status <service name>
salt ‘*’ service.stop <service name>
salt ‘*’ shadow.default_hash
salt ‘*’ shadow.del_password username
salt ‘*’ shadow.gen_password ‘I_am_password’
salt ‘*’ shadow.gen_password ‘I_am_password’ crypt_salt’I_am_salt’ algorithm=sha256
salt ‘*’ shadow.info root
salt ‘*’ shadow.set_date username 0
salt ‘*’ shadow.set_expire username -1
salt ‘*’ shadow.set_inactdays username 7
salt ‘*’ shadow.set_maxdays username 90
salt ‘*’ shadow.set_mindays username 7
salt ‘*’ shadow.set_password root ‘$1$UYCIxa628.9qXjpQCjM4a..’
salt ‘*’ shadow.set_warndays username 7
salt ‘*’ sqlite3.fetch /root/test.db ‘SELECT * FROM test;’
salt ‘*’ sqlite3.indexes /root/test.db
salt ‘*’ sqlite3.indices /root/test.db
salt ‘*’ sqlite3.modify /root/test.db ‘CREATE TABLE test(id INT, testdata TEXT);’
salt ‘*’ sqlite3.sqlite_version
salt ‘*’ sqlite3.tables /root/test.db
salt ‘*’ sqlite3.version
salt ‘*’ ssh.auth_keys root
salt ‘*’ ssh.check_key <user> <key> <enc> <comment> <options>
salt ‘*’ root salt://ssh/keyfile
salt ‘*’ ssh.check_known_host <user> <hostname> key=’AAAA…FAaQ==’
salt ‘*’ ssh.get_known_host <user> <hostname>
salt ‘*’ ssh.hash_known_hosts
salt ‘*’ ssh.host_keys
salt ‘*’ ssh.recv_known_host <hostname> enc=<enc> port=<port>
salt ‘*’ ssh.rm_auth_key <user> <key>
salt ‘*’ ssh.rm_known_host <user> <hostname>
salt ‘*’ ssh.set_auth_key <user> ‘<key>’ enc=’dsa’
salt ‘*’ ssh.set_auth_key_from_file <user> salt://ssh_keys/<user>.id_rsa.pub
salt ‘*’ ssh.set_known_host <user> fingerprint=’xx:xx:..:xx’ enc=’ssh-rsa’ config=’.ssh/known_hosts’
salt ‘*’ ssh.user_keys
salt ‘*’ ssh.user_keys user=user1
salt ‘*’ ssh.user_keys user=user1 pubfile=/home/user1/.ssh/id_rsa.pub prvfile=/home/user1/.ssh/id_rsa
salt ‘*’ ssh.user_keys user=”[‘user1′,’user2′] pubfile=id_rsa.pub prvfile=id_rsa
salt ‘*’ state.clear_cache
salt ‘*’ state.high ‘{“vim”: {“pkg”: [“installed”]}}’
salt ‘*’ state.highstate
salt ‘*’ state.highstate whitelist=sls1_to_run,sls2_to_run
salt ‘*’ state.highstate exclude=sls_to_exclude
salt ‘*’ state.highstate exclude=”[{‘id': ‘id_to_exclude’}, {‘sls': ‘sls_to_exclude’}]”
salt ‘*’ state.highstate pillar=”{foo: ‘Foo!’, bar: ‘Bar!’}”
salt ‘*’ state.low ‘{“state”: “pkg”, “fun”: “installed”, “name”: “vi”}’
salt ‘*’ state.pkg /tmp/state_pkg.tgz
salt ‘*’ state.running
salt ‘*’ state.show_highstate
salt ‘*’ state.show_low_sls foo
salt ‘*’ state.show_lowstate
salt ‘*’ state.show_sls core,edit.vim dev
salt ‘*’ state.show_top
salt ‘*’ state.single pkg.installed name=vim
salt ‘*’ state.sls core,edit.vim dev
salt ‘*’ state.sls core exclude=”[{‘id': ‘id_to_exclude’}, {‘sls': ‘sls_to_exclude’}]”
salt ‘*’ state.sls myslsfile pillar=”{foo: ‘Foo!’, bar: ‘Bar!’}”
salt ‘*’ state.sls_id apache http
salt ‘*’ state.template ‘<Path to template on the minion>’
salt ‘*’ state.template_str ‘<Template String>’
salt ‘*’ state.top reverse_top.sls
salt ‘*’ state.top reverse_top.sls exclude=sls_to_exclude
salt ‘*’ state.top reverse_top.sls exclude=”[{‘id': ‘id_to_exclude’}, {‘sls': ‘sls_to_exclude’}]”
salt ‘*’ status.all_status
salt ‘*’ status.cpuinfo
salt ‘*’ status.cpustats
salt ‘*’ status.custom
salt ‘*’ status.diskstats
salt ‘*’ status.diskusage [paths and/or filesystem types]
salt ‘*’ status.diskusage # usage for all filesystems
salt ‘*’ status.diskusage / /tmp # usage for / and /tmp
salt ‘*’ status.diskusage ext? # usage for ext[234] filesystems
salt ‘*’ status.diskusage / ext? # usage for / and all ext filesystems
salt ‘*’ status.loadavg
salt ‘*’ status.master
salt ‘*’ status.meminfo
salt ‘*’ status.netdev
salt ‘*’ status.netstats
salt ‘*’ status.nproc
salt ‘*’ status.pid <sig>
salt ‘*’ status.procs
salt ‘*’ status.uptime
salt ‘*’ status.version
salt ‘*’ status.vmstats
salt ‘*’ status.w
salt ‘*’ supervisord.add <name>
salt ‘*’ supervisord.custom “mstop ‘*gunicorn*'”
salt ‘*’ supervisord.options foo
salt ‘*’ supervisord.remove <name>
salt ‘*’ supervisord.reread
salt ‘*’ supervisord.restart <service>
salt ‘*’ supervisord.restart <group>:
salt ‘*’ supervisord.start <service>
salt ‘*’ supervisord.start <group>:
salt ‘*’ supervisord.status
salt ‘*’ supervisord.status_raw
salt ‘*’ supervisord.stop <service>
salt ‘*’ supervisord.stop <group>:
salt ‘*’ supervisord.update
salt ‘*’ sys.argspec pkg.install
salt ‘*’ sys.argspec sys
salt ‘*’ sys.argspec
salt ‘*’ sys.doc
salt ‘*’ sys.doc sys
salt ‘*’ sys.doc sys.doc
salt ‘*’ sys.doc network.traceroute user.info
salt ‘*’ sys.list_functions
salt ‘*’ sys.list_functions sys
salt ‘*’ sys.list_functions sys user
salt ‘*’ sys.list_modules
salt ‘*’ sys.list_returner_functions
salt ‘*’ sys.list_returner_functions mysql
salt ‘*’ sys.list_returner_functions mysql etcd
salt ‘*’ sys.list_returners
salt ‘*’ sys.list_runner_functions
salt ‘*’ sys.list_runner_functions state
salt ‘*’ sys.list_runner_functions state virt
salt ‘*’ sys.list_runners
salt ‘*’ sys.list_state_functions
salt ‘*’ sys.list_state_functions file
salt ‘*’ sys.list_state_functions pkg user
salt ‘*’ sys.list_state_modules
salt ‘*’ sys.reload_modules
salt ‘*’ sys.returner_doc
salt ‘*’ sys.returner_doc sqlite3
salt ‘*’ sys.returner_doc sqlite3.get_fun
salt ‘*’ sys.returner_doc sqlite3.get_fun etcd.get_fun
salt ‘*’ sys.runner_doc
salt ‘*’ sys.runner_doc cache
salt ‘*’ sys.runner_doc cache.grains
salt ‘*’ sys.runner_doc cache.grains mine.get
salt ‘*’ sys.state_doc
salt ‘*’ sys.state_doc service
salt ‘*’ sys.state_doc service.running
salt ‘*’ sys.state_doc service.running ipables.append
salt ‘*’ sysctl.assign net.ipv4.ip_forward 1
salt ‘*’ sysctl.get net.ipv4.ip_forward
salt ‘*’ sysctl.persist net.ipv4.ip_forward 1
salt ‘*’ sysctl.show
salt ‘*’ system.halt
salt ‘*’ system.init 3
salt ‘*’ system.poweroff
salt ‘*’ system.reboot
salt ‘*’ system.shutdown
salt ‘*’ test.arg 1 “two” 3.1 txt=”hello” wow='{a: 1, b: “hello”}’
salt ‘*’ test.arg_repr 1 “two” 3.1 txt=”hello” wow='{a: 1, b: “hello”}’
salt ‘*’ test.arg_type 1 ‘int’
salt ‘*’ test.collatz 3
salt ‘*’ test.conf_test
salt ‘*’ test.cross_test file.gid_to_group 0
salt ‘*’ test.echo ‘foo bar baz quo qux’
salt ‘*’ test.exception ‘Oh noes!’
salt ‘*’ test.fib 3
salt ‘*’ test.get_opts
salt ‘*’ test.kwarg num=1 txt=”two” env='{a: 1, b: “hello”}’
salt ‘*’ test.not_loaded
salt ‘*’ test.opts_pkg
salt ‘*’ test.outputter foobar
salt ‘*’ test.ping
salt ‘*’ test.provider service
salt ‘*’ test.providers
salt ‘*’ test.rand_sleep 60
salt ‘*’ test.rand_str
salt ‘*’ test.retcode 42
salt ‘*’ test.sleep 20
salt ‘*’ test.stack
salt ‘*’ test.tty tty0 ‘This is a test
salt ‘*’ test.tty pts3 ‘This is a test
salt ‘*’ test.version
salt ‘*’ test.versions_information
salt ‘*’ test.versions_report
salt ‘*’ timezone.get_hwclock
salt ‘*’ timezone.get_offset
salt ‘*’ timezone.get_zone
salt ‘*’ timezone.get_zonecode
salt ‘*’ timezone.set_hwclock UTC
salt ‘*’ timezone.set_zone ‘America/Denver’
salt ‘*’ timezone.zone_compare ‘America/Denver’
salt ‘*’ user.add name <uid> <gid> <groups> <home> <shell>
salt ‘*’ user.chfullname foo “Foo Bar”
salt ‘*’ user.chgid foo 4376
salt ‘*’ user.chgroups foo wheel,root True
salt ‘*’ user.chhome foo /home/users/foo True
salt ‘*’ user.chhomephone foo “7735551234”
salt ‘*’ user.chroomnumber foo 123
salt ‘*’ user.chshell foo /bin/zsh
salt ‘*’ user.chuid foo 4376
salt ‘*’ user.chworkphone foo “7735550123”
salt ‘*’ user.delete name remove=True force=True
salt ‘*’ user.getent
salt ‘*’ user.info root
salt ‘*’ user.list_groups foo
salt ‘*’ user.list_users
salt ‘*’ virtualenv.create /path/to/new/virtualenv
salt ‘*’ virtualenv.get_site_packages /path/to/my/venv
salt ‘*’ webutil.useradd /etc/httpd/htpasswd larry badpassword
salt ‘*’ webutil.useradd /etc/httpd/htpasswd larry badpass opts=ns
salt ‘*’ webutil.useradd /etc/httpd/htpasswd larry badpassword
salt ‘*’ webutil.useradd /etc/httpd/htpasswd larry badpass opts=ns
salt ‘*’ webutil.userdel /etc/httpd/htpasswd larry